## Step 1: Gather Materials
– Key fob to synchronize
– Car documentation [1][8]
– Secondary key (if available) [1][9]
## Phase 2: Sit in Driver Seat
Confirm all access panels are closed [2][8]
Sit in control chair [2][9]
## Step 3: Place Key in Engine Switch https://keyfobprog.com/
Turn key to ‘On’ position without engaging powerplant [1][5]
Hold for instrument panel to activate [3][9]
## Initiate Programming: Engage Function
Locate closure switch on remote
Maintain pressure for 5 seconds [1][3]
Listen for acknowledgement tone [3][10]
## Phase 5: Repeat Process
Rotate key to ‘Off’ position [1][5]
Complete several iterations when required [9][10]
## Issue Resolution
Frequent problems include:
– Dead battery: Swap power unit [4][6]
– Signal interference: Move away from electronics [4][7]
– Sync error: Repeat process [5][11]
Professional tools like Autel KM100 can facilitate complex cases [6][7]